Nordic Damp Proofing recently completed a plaster repair and reinstatement project at a property in Aylesbury, Buckinghamshire.
The work focused on repairing cracked and deteriorated internal corner joints in several areas of the property, alongside the preparation and complete skim plastering of approximately 8m² of wall surface within Bedroom 2.
Rather than simply filling over the visible cracks, the affected junctions were prepared, reinforced using suitable scrim tape and replastered to provide a stronger and more consistent finish.
Cracking Along Internal Wall and Ceiling Junctions
Several cracks were visible along internal corners and at wall-to-ceiling junctions throughout the property.
Cracks around these junctions can become particularly noticeable as different surfaces meet, leaving long lines across an otherwise sound decorative finish.
For this project, the affected joints required proper preparation before being reinforced and replastered.
Preparing the Cracked Corner Joints
Before new plaster was applied, the identified cracked and deteriorated joints were carefully prepared.
This provided a suitable surface for the repair and allowed the new reinforcement to be incorporated into the affected junction rather than simply covering the existing crack with filler.
As with our wider wall repair and re-plastering services, correct preparation is an important part of producing a neat and durable finish.
Scrim Tape Reinforcement
Suitable scrim tape was installed across the prepared joints to reinforce the affected areas prior to replastering.
The reinforcement helps bridge the joint and provides additional support to the new plaster finish.
Once installed, the repaired areas could be replastered and blended into the surrounding surfaces, reinstating the internal corners and junctions ready for subsequent decoration.
Full Wall Skim in Bedroom 2
In addition to the individual joint repairs, Bedroom 2 required more extensive plastering work.
Approximately 8m² of wall surface was prepared and given a complete skim plaster finish.
Skimming the full wall rather than carrying out a series of smaller isolated repairs provided a consistent surface across the entire treatment area and avoided an uneven or visibly patched finish.
A Smooth and Consistent New Plaster Finish
The photographs taken during the project show the progression from the original cracked and deteriorated surfaces through to the newly skimmed wall.
Following preparation, a fresh plaster skim was applied across the approximately 8m² wall area to create a smooth and uniform surface.
The finished plaster was left ready for the client to decorate once it had dried sufficiently.
Works Completed at the Aylesbury Property
The project included:
- Inspection of the identified cracked internal junctions
- Preparation of cracked and deteriorated corner joints
- Preparation of affected wall-to-ceiling junctions
- Installation of suitable scrim tape to reinforce the repairs
- Replastering of repaired joints
- Preparation of approximately 8m² of wall within Bedroom 2
- Full skim plastering of the Bedroom 2 wall
- Blending and finishing of treated areas
- Leaving the new plaster surfaces ready for subsequent decoration by the client
Why Properly Repair Cracked Plaster Joints?
Small cracks are sometimes repeatedly filled and painted without properly preparing the joint beneath them. While this can temporarily improve their appearance, the crack can remain visible or reappear.
Where appropriate, opening and preparing the affected area before applying reinforcement and new plaster provides a more comprehensive repair.
It also allows the surrounding finish to be reinstated properly, which is particularly important where cracks run along prominent internal corners or ceiling junctions.
Wall Repairs and Replastering in Aylesbury
Nordic Damp Proofing carries out specialist plaster removal, wall repairs and replastering as part of our property preservation and remedial services across Aylesbury and the wider Buckinghamshire area.
Our work can range from localised plaster repairs and cracked junctions through to removing damaged or contaminated plaster and reinstating complete wall surfaces following damp treatment.
If cracking, deteriorating plaster or signs of moisture are affecting your property, Nordic Damp Proofing can assess the affected areas and recommend suitable remedial work.
Book a survey with Nordic Damp Proofing to arrange an assessment of your property.
